Introduction
This is a 1-card 4-port 4K60 HDR output card to be used on the 8×8, 16×16 and 36×36 and 80×80 modular chassis matrix, it can support 4-PIN DIP switch for the scaling output and 3.5m audio de-embedded for every HDMI inputs.
Features
- Output resolution up to 4K60
- Supports 4-PIN DIP switch for the output resolution scaling
- Supports 5mm audio de-embedded for all 4 HDMI outputs
- Can work with the 8×8, 16×16 and 36×36, 80×80 Card Cage chassis
Specification
| Audio and Video | |
| Outputs | 4x HDMI out: 19-pin type-A; 4xAudio out: 3.5mm jack |
| EDID | 4-PIN DIP switch for output resolution scaling |
| Latency | 15 to 30ms(miliseconds) |
| Audio Formats | 2ch PCM: DTS-HD Master, TrueHD, no ARC, no Dolby Atoms |
|
Video Resolutions and cable distance(AWG 26) |
1920x720P60hz 12 bit, cable length is up to 15m/40ft |
| 1920x1080P30hz 12 bit, cable length is up to 15m/40ft | |
| 1920x1080P60hz 12 bit, cable length is up to 15m/40ft | |
| 3840x2160P30hz 8 bit, cable length is up to 10m/30ft | |
| 3840x2160P60hz 8 bit, cable length is up to 8m/20ft | |
| Standards/Protocol | HDMI2.0, HDCP2.2 |
| Maximum Pixel Clock | HDMI: 296Mhz |
| Communication And Control | |
| HDMI | HDMI2.0 |
| Power | |
| Power Supply | Internal to/from matrix |
| Consumption | 3W |
4-DIP red switch on the board
